Build the size mix from the exact garment chart and a sample run. Player measurements or past sales tell you how many units to allocate. A catalogue size range tells you which labels to ask about. Keep one row per style, edition and size, and record the corresponding garment dimensions before the supplier confirms quantities.
What 2,821 catalogue listings show
Kuangtu Football examined its English-language wholesale catalogue on . The unit of analysis was a product listing. A listing counted as having a range when its supplier record contained a usable size range. Repeated designs with different catalogue references were counted separately. The counts describe supplier listings and cannot establish current stock, the number of distinct designs or what sizes customers buy.
| Catalogue section | Listings | Size range recorded | Share |
|---|---|---|---|
| Club jerseys | 1,052 | 1,018 | 96.8% |
| National team jerseys | 530 | 518 | 97.7% |
| Youth styles | 497 | 257 | 51.7% |
| Training wear | 532 | 98 | 18.4% |
| Outerwear | 124 | 7 | 5.6% |
| Other styles | 86 | 83 | 96.5% |
| Total | 2,821 | 1,981 | 70.2% |
S–4XL was the most common recorded range, appearing on 1,157 listings. All 257 youth listings with a range used 16–28. These numbers are catalogue labels. Give the supplier the child’s measurements and ask which size on the exact kit chart matches them. The 840 listings without ranges are worth confirming before you add them to a quote, especially when the order mixes jerseys, training sets and jackets.
Record how the garment was measured
- Lay a jersey that fits on a flat surface. Smooth it without stretching the fabric.
- Record the width across the chest just below the armholes. For length, use the same starting point (for example, high shoulder to hem) on both garments.
- Label each number with its unit and method. A 53 cm flat chest width is approximately 106 cm around a flat, symmetric garment. A 106 cm body chest measurement describes the person and needs a fit allowance.
- Ask the supplier for the measuring points, width or circumference, and tolerance for each exact style and edition. For trousers, record waist and inseam separately.
The Kuangtu adult reference charts illustrate the difference. The player chart shows full chest circumference. The fan chart's 51–63 cm figures appear to be flat widths, and the method still needs supplier confirmation. Use style-specific measurements before comparing those two tables or assigning sizes.
Use one size run for each style and edition
For a team, start with the roster and a measured sample. For a shop, use sales by size for a comparable cut, including returns or size exchanges. Fit a sample in the sizes that carry the most units and check the ends of the range when the order depends on them. If two styles share the same chart label, record their measurements separately until you confirm the cuts agree.
A working order sheet needs the catalogue reference, edition, size label, chest width, length, quantity and sample approval status. Suppose a 30-shirt team order starts with S 4, M 8, L 9, XL 6 and 2XL 3. If two people change from M to L after fitting, the final line becomes S 4, M 6, L 11, XL 6 and 2XL 3. The total stays at 30. Apply this step separately to each edition and check every print line against the final sizes.
The analysis used the Kuangtu Football supplier catalogue and the original vendor charts linked in its sizing guide. Kuangtu Football operates the catalogue and sells the products described here. The audit reviewed catalogue fields and did not measure the garments.